HPE Networking CW 2150 48p 10M/100M/1G PoE+ 4p SFP+ 1G/10G 390W Switch, Managed, Gigabit Ethernet (10/100/1000), Full duplex, Power over Ethernet (PoE)
Reasons To Buy
Enterprise-class secure and reliable connectivity
The HPE Networking CW 2150 Switch Series delivers up to 176 Gbps of nonblocking bandwidth and up to 131 Mpps forwarding, with nine unit IRF stacking for resilient availability and link redundancy.
The CW 2150 series offers flexible connectivity with four 1G/10G SFP+ uplinks on the 16, 24, and 48 port models, and two 1G SFP plus two 1G/10G SFP+ uplinks on the 8 port model. The 24 port model adds four SFP combo ports.
Advanced Quality of Service (QoS), Internet Protocol version 6 (IPv6) and dynamic L3 protocols (RIP and OSPF) for reliable connectivity
It supports IEEE 802.3az Energy Efficient Ethernet and offers a fanless design on the 8‑, 24‑, and 48‑port non‑PoE models.
Built‑in 6 kV service‑port surge protection helps reduce the risk of power strikes in demanding environments such as construction sites.
Powerful PoE capabilities
The HPE Networking CW 2150 Switch Series provides 125 W, 248 W, 405 W, 390 W, and 770 W Class 4 PoE across the 8‑, 16‑, 24‑, and 48‑port models.
It supports advanced PoE features, including fast PoE that delivers power within seconds of system startup.
Perpetual PoE supports end‑device state monitoring to help maintain power during a power‑source reboot.
The PoE Watchdog function automatically removes power from a port when the connected device is no longer active.
Comprehensive security control
The HPE Networking CW 2150 Switch Series provides security features and network management for modern SMB environments. Secure boot verifies digital signatures to help prevent unauthorized or malicious software from loading at startup.
With HPE IMC, the CW 2150 series supports EAD by integrating terminal‑security policies, network‑access control, and access‑rights enforcement into a unified security framework.
It delivers multi‑layer access protection with granular ACLs (IPv4/IPv6, VLAN, port‑based), identity‑driven policies, and authentication options including 802.1X, MAC, Web, RADIUS, TACACS+, plus Guest VLAN detection and dual‑NIC detection with IMC.
The CW 2150 series provides encrypted access using SSHv2, SSL, SNMPv3, and TLS, along with role‑based privileges and audit logging.
Threat‑prevention features include Control Plane Policing (DoS protection), ARP and DHCP protection, ICMP throttling, port security, and source‑port filtering.
Simple and flexible management
The HPE Networking CW 2150 Switch Series offers Web GUI, industry‑standard CLI management and can be managed with other CW switches through a built-in dashboard for simplified deployment and centralized management.
Advanced management options include HPE Intelligent Management Center (IMC), HPE Networking Management Software (AirWave), SNMP managers, and REST APIs for integration with existing customer dashboards.
Description
HPE Networking CW 2150 48p 10M/100M/1G PoE+ 4p SFP+ 1G/10G 390W Switch. Switch type: Managed. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 48, Installed SFP+ modules quantity: 4, USB 2.0 ports quantity: 1, Console port: RJ-45/USB Type-C. Full duplex. Switching capacity: 176 Gbit/s. Power over Ethernet (PoE)
Specifications
| Management features |
|---|
| Switch type |
Managed |
| Reset button |
No |
| Web-based management |
Yes |
| Quality of Service (QoS) support |
No |
| Multicast support |
No |
| Configuring Location Settings (CLI) |
Yes |
| Cloud-managed |
No |
| Ports & interfaces |
|---|
| Basic switching RJ-45 Ethernet ports quantity |
48 |
| Basic switching RJ-45 Ethernet ports type |
Gigabit Ethernet (10/100/1000) |
| Installed SFP modules quantity |
0 |
| Installed SFP+ modules quantity |
4 |
| Console port |
RJ-45/USB Type-C |
| Gigabit Ethernet (copper) ports quantity |
48 |
| USB 2.0 ports quantity |
1 |
| Fiber ports quantity |
4 |
| Network |
|---|
| Full duplex |
Yes |
| MAC address auto-learning supported |
Yes |
| MAC address auto-aging supported |
Yes |
| Cable length detection |
Yes |
| Active link detection |
Yes |
| Head-of-line (HOL) blocking |
No |
| VLAN support |
Yes |
| Spanning tree protocol |
No |
| Rate limiting |
No |
| Port mirroring |
No |
| Link aggregation |
No |
| IP routing |
No |
| Flow control support |
No |
| Broadcast storm control |
No |
| Auto-sensing |
Yes |
| Auto MDI/MDI-X |
Yes |
| 10G support |
Yes |
| Half duplex |
No |
| Auto-negotiation |
Yes |
| Policy-based routing |
Yes |
| Data transmission |
|---|
| Switching capacity |
176 Gbit/s |
| Throughput |
130 Mpps |
| Latency (1 Gbps) |
5 µs |
| Latency (10 Gbps) |
3 µs |
| Jumbo frames support |
No |
| Static route |
Yes |
| Security |
|---|
| Password protection |
No |
| Multicast features |
|---|
| Multicast support |
No |
| Protocols |
|---|
| IP Source Guard (IPSG) |
No |
| Design |
|---|
| Rack mounting |
No |
| Stackable |
Yes |
| Product colour |
Black |
| Reset button |
No |
| DIN rail mounting |
No |
| Wall mountable |
No |
| Number of fans |
2 fan(s) |
| Performance |
|---|
| Physical stacking (units) |
9 |
| Processor frequency |
1200 MHz |
| Memory type |
SDRAM |
| Internal memory |
1000 MB |
| Flash memory |
512 MB |
| Firmware upgradeable |
No |
| Processor manufacturer |
ARM |
| Built-in processor |
Yes |
| Stackable |
Yes |
| Auto-negotiation |
Yes |
| Power |
|---|
| Power supply included |
Yes |
| AC input voltage |
100 - 240 V |
| AC input frequency |
50/60 Hz |
| Power consumption (typical) |
54 W |
| Power consumption (max) |
512 W |
| Redundant power supply (RPS) support |
No |
| Input voltage |
100–240 |
| Power consumption note |
Idle: 29W Typical: 54W Full load: 512W (PoE 390W) |
| Power source |
AC |
| Power supply note |
Fixed, 90–264V, single AC |
| Power over Ethernet (PoE) |
|---|
| Power over Ethernet (PoE) |
Yes |
| Power over Ethernet plus (PoE+) ports quantity |
390 |
| Power over Ethernet (PoE) type supported |
PoE+ |
| Other features |
|---|
| Latency |
1 GE: < 5µs 10 GE: < 3µs (64-byte packets) |
| Performance management |
Web GUI Command Line Interface (CLI) Smart Management Center (SmartMC) HPE Intelligence Management Center (IMC) HPE Networking Management Software (AirWave) REST API SNMP |
| Memory and processor |
CPU: Dual-core Arm at 1.2 GHz Flash: 512 MB SDRAM: 1 GB |
| Fan |
2 |
| Weight (imperial) |
11.684 lbs |
| I/O ports |
48 x 10/100/1000BASE-T PoE+ ports 4 x 1/10GBASE-X SFP+ ports 1 x RJ-45 console, 1 x USB Type-C console, 1 x USB and 1 x OOBM management |
| Dimensions (W x D x H) (imperial) |
14.96 x 21.65 x 5.24" |
| Input voltage |
100–240 |
| Operational conditions |
|---|
| Operating temperature (T-T) |
-5 - 50 °C |
| Heat dissipation |
99 BTU/h |
| Virtual LAN features |
|---|
| VLAN support |
Yes |
| Weight & dimensions |
|---|
| Width |
21.7" (550 mm) |
| Depth |
15" (380 mm) |
| Height |
5.24" (133.1 mm) |
| Weight |
11.7 lbs (5.3 kg) |
| Packaging content |
|---|
| User guide |
Yes |
| Quick start guide |
Yes |
| Manual |
Yes |
| Packaging data |
|---|
| User guide |
Yes |
| Quick start guide |
Yes |
| Manual |
Yes |
