DisplayPort 1.2a Extender Kit Ideal for Digital Signage in Schools and Offices
This complete transmitter and transceiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The B127A-111-BDTD extends 4K signals from a DisplayPort source device to a DisplayPort monitor up to 230 feet (70.1 meters) away with zero latency via user-supplied Cat6 cabling.

Transmits Crystal-Clear 4K Video with 4:4:4 Color
The B127A-111-BDTD supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 30 Hz with 7.1-channel surround sound via the transceiver’s TOSLINK audio output. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display.

Local HDMI Port on Transmitter Supports 4K @ 30 Hz Resolution
To monitor the video signal being extended to the transceiver, connect a 4K display to the transmitter’s local HDMI port with a user-supplied HDMI cable.

Built-In PoC Technology Provides Transceiver Power to Avoid Bulky External Power Bricks
Power over Cable (PoC) technology powers either the transmitter or transceiver over Cat6 cable. Connect the included power supply at either end to power the entire installation. LEDs on both the transmitter and transceiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the transceiver where needed without worrying about finding a nearby AC outlet.

Create a Daisy Chain to Achieve Even More Distance
This extender kit is capable of forming daisy-chain installations up to 920 feet (280.4 meters) from the transmitter by connecting additional B127A-110-BD transceivers (sold separately). Up to four total transceivers can be chained together, each capable of extending a 4K/30 Hz signal up to 230 feet per unit. The kit is also compatible with B127A-010-H signal booster (sold separately), which allows the signal, when used in a daisy chain, to be enhanced up to 1,090 feet (332.2 meters) total. Note
: B127A-010-H will only work when used in the first link of the daisy-chain installation.

Plug-and-Play Operation for Quick Setup and Immediate Use
The included transmitter and transceiver units work right out of the box with no software required. Mounting hardware is included for installing the transceiver on a wall, pole or 19-inch rack. Connect the transmitter to the source with a user-supplied DisplayPort cable (such as P580-Series). Then, connect the transceiver to the display with another user-supplied DisplayPort cable. Finally, connect the two units with user-supplied Cat6 patch cable (such as N202-Series cable).

TAA-Compliant for GSA Schedule Purchases
The B127A-111-BDTD is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Features
Type	AV transmitter & transceiver
Maximum resolution	3840 x 2160 pixels
Cable types supported	Cat5, Cat5e, Cat6, HDMI
Colour depth	36 bit
Audio output channels	7.1 channels
Rack mounting	Yes
Consumer Electronics Control (CEC) support	Yes
3D	Yes
Maximum transfer distance	2759.8" (70.1 m)
Audio system	Multichannel
Supported video modes	480i, 480p, 720p, 1080i, 1080p, 2160p
Supported graphics resolutions	1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 3840 x 2160
Material	Metal
LED indicators	Yes
HDCP	Yes
Cable length	54.3" (1.38 m)
Product colour	Black
Extended display identification data (EDID)	Yes
HDCP version	1.4/2.2
Ports & interfaces
RJ-45 input ports	1
RJ-45 output ports	2
DisplayPorts out	1
DisplayPorts in	1
HDMI in	1
Ethernet LAN	Yes
DC-in jack	Yes
Connectivity technology	Wired
Digital audio optical out	1
Power
Input current	0.6 A
Output current	1 A
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
External power adapter	Yes
Operating voltage	24 V
Operational conditions
Storage relative humidity (H-H)	0 - 85%
Operating relative humidity (H-H)	0 - 85%
Storage temperature (T-T)	-15 - 50 °C
Operating temperature (T-T)	0 - 40 °C
Weight & dimensions
Receiver dimensions (WxDxH)	4.53 x 2.46 x 1.06" (115 x 62.4 x 27 mm)
Receiver weight	15.9 oz (450 g)
Transmitter dimensions (WxDxH)	4.53 x 2.46 x 1.06" (115 x 62.4 x 27 mm)
Transmitter weight	15.9 oz (450 g)
Packaging data
Package width	10.2" (260.1 mm)
Package weight	19.8 oz (560 g)
Package type	Box
Package height	2.17" (55.1 mm)
Package depth	6.46" (164.1 mm)
Quantity per pack	1 pc(s)
Packaging content
Mounting kit	Yes
Manual	Yes
AC adapter included	Yes
Included power plug types	AU, EU, NA, UK
Technical details
Country of origin	Taiwan
Sustainability compliance	Yes
Compliance certificates	CE, REACH, RoHS
Logistics data
Master (outer) case width	22.6" (573 mm)
Master (outer) case length	10.7" (273 mm)
Master (outer) case height	6.89" (175 mm)
Master (outer) case gross weight	13 lbs (5.9 kg)
Products per master (outer) case	10 pc(s)
Master (outer) case GTIN (EAN/UPC)	10037332263961